This test used an EC-30 laser with LightBurn software to mark a suede baseball cap. The goal was to check whether the machine could create a clear decorative graphic on the suede surface.
1. Test Goal
The test was carried out to verify the marking performance of the EC-30 on suede. The required result was a clear visible design on the front panel of a baseball cap.
2. Test Requirement
The sample was a suede baseball cap. The marking process needed to produce a clean decorative graphic on the cap surface.
3. Machine and Material Setup
| Item | Details |
|---|---|
| Machine type | CO2 laser |
| Machine model | EC-30 |
| Software | LightBurn |
| Material | Suede |
| Test object | Baseball cap |
| Application | Decorative marking / cap customization |
| Process | Laser marking |
| Processing time | 40 s |
| Test result | Good |
4. Laser Parameter Used
| Parameter Item | Value |
|---|---|
| Mode | Fill |
| Speed | 1500 mm/s |
| Max power | 35% |
| Frequency | 40 kHz |
| Q-Pulse width | 10 ns |
| Global passes | 1 |
| Line interval / Hatch | 0.1000 mm |
| Lines per inch | 254.000 |
| Scan angle | 0 deg |
| Number of passes | 1 |
| Angle increment | 0.0 |
5. Test Result
The EC-30 completed the suede baseball cap marking test in 40 s. The result images show a visible decorative graphic on the cap surface with clear contrast against the suede texture. The recorded test effect was good.
6. Test Conclusion
This suede baseball cap marking test achieved the required visual effect using the EC-30. The result shows that the machine can create decorative marking on a textured suede cap surface.
This type of result may be useful for custom hats, fashion accessories, team merchandise, event products, personalized gifts, and small-batch apparel customization. Before batch production, the final parameter values should be confirmed with the same material, artwork file, lens setup, and marking software.
