This test used an EC-60 laser with LightBurn software to process 2mm plywood. The goal was to check whether the machine could cut the plywood parts cleanly for a decorative assembled wooden craft.
1. Test Goal
The test was carried out to verify the cutting performance of the EC-60 on 2mm plywood. The required result was a clean cut with usable parts for assembly.
2. Test Requirement
The sample material was 2mm plywood. The process needed to cut the designed wooden parts.
3. Machine and Material Setup
| Item | Details |
|---|---|
| Machine type | CO2 laser |
| Machine model | EC-60 |
| Software | LightBurn |
| Material | Wood board / plywood |
| Test object | 2mm plywood |
| Application | Wooden craft cutting / decorative plywood product |
| Process | Laser cutting |
| Processing time | 20 min |
| Test result | Good |
4. Laser Parameter Used
| Parameter Item | Value |
|---|---|
| Mode | Line |
| Speed | 100 mm/s |
| Max power | 50% |
| Frequency | 40 kHz |
| Global passes | 11 |
| Number of passes | 1 |
| Perforation mode | Cut 0.05 / Skip 0.05 |
| Kerf offset | 0.000 mm |
| Pass count | 1 |
5. Test Result
The EC-60 completed the 2mm plywood cutting test in 20 min. The final image shows an assembled wooden decorative basket, with visible cut edges and surface graphic details. The recorded test effect was good.
6. Test Conclusion
This plywood cutting test achieved the required result using the EC-60. The result shows that the machine can cut thin plywood parts for decorative assembled wooden craft applications.
This type of result may be useful for wooden gift packaging, seasonal decorations, craft products, model parts, small-batch custom displays, and prototype validation. Before batch production, the final parameter values should be confirmed with the same material, artwork file, lens setup, and marking software.
