Introduction
This test used a TR Series 5W laser with LightBurn software to mark soft acrylic fluorescent bracelets. The goal was to check whether the machine could create clear decorative text and graphics on the bracelet surface. The total marking time for this test was approximately 1 min 20 s.
1. Test Goal
The test was carried out to verify the marking performance of the TR Series 5W on soft acrylic fluorescent bracelets. The required result was a clear visible marking effect with good readability and appearance.
2. Test Requirement
The sample was a fluorescent bracelet made from soft acrylic. The marking process needed to produce decorative text and graphic details on the bracelet surface.
3. Machine and Material Setup
| Item | Details |
|---|---|
| Machine type | UV laser |
| Machine model | TR Series 5W |
| Software | LightBurn |
| Lens | F290, 200 x 200 mm |
| Material | Soft acrylic |
| Test object | Fluorescent bracelet |
| Application | Laser marking |
| Processing time | 1 min 20 s |
| Test result | Good |
4. Laser Parameter Used
| Parameter Item | Value |
|---|---|
| Mode | Fill |
| Speed | 2000 mm/s |
| Max power | 20% |
| Frequency | 40 kHz |
| Q-Pulse width | 13.00 ns |
| Pass count | 1 |
| Interval | 0.0800 mm |
5. Test Result
The TR Series 5W completed the soft acrylic fluorescent bracelet marking test in 1 min 20 s. The result images show clear text and graphic marking on the translucent bracelet surface, with good visibility on different bracelet colors. The recorded test effect was good.
6. Test Conclusion
This soft acrylic fluorescent bracelet marking test achieved the required visual effect using the TR Series 5W. The result shows that the machine can create clear decorative text and graphic marking on translucent soft acrylic bracelet surfaces.
This type of result may be useful for event wristbands, sports fan accessories, custom party products, promotional bracelets, and small-batch personalized gifts. Before batch production, the final parameter values should be confirmed with the same material, artwork file, lens setup, and marking software.
