Introduction
This test recorded an engraving test on a black anodized aluminum plate. The test focused on producing a championship-themed commemorative image with clear contrast and readable detail.
1. Test Goal
The test was to verify whether the MP-60 fiber laser marking machine could engrave a previous championship team commemorative image on black anodized aluminum. The test needed to confirm whether the artwork could be reproduced clearly on the black aluminum surface.
2. Test Requirement
The requested sample was a black anodized aluminum plate. The required effect was to engrave a commemorative image related to a previous winning team.
3. Machine and Material Setup
| Field | Value |
|---|---|
| Machine type | Fiber laser |
| Machine model | MP-60 |
| Software | LightBurn |
| Material | Anodized aluminum |
| Test object | Black anodized aluminum plate |
| Application | Championship commemorative image |
| Process | Engraving / image marking |
| Marking time | 5 min 14 sec |
| Test result | Good |
4. Laser Parameter Used
| Parameter Item | Value |
|---|---|
| Layer | C00 |
| Layer mode | Image |
| Speed | 1000 mm/s |
| Max power | 50% |
| Min power | 20% |
| Frequency | 60 kHz |
| Q-Pulse width | 200 ns |
| Line interval | 0.0500 mm |
| DPI | 508 |
| Scan angle | 0 deg |
| Image mode | Stucki |
| Pass count | 1 |
| Bi-directional scanning | Enabled |
| Negative image | Enabled |
| Dot width | 0.080 |
5. Test Result
The sample was processed successfully, and the source record marked the result as good. The recorded marking time was 5 minutes 14 seconds. The result image shows a high-contrast commemorative design engraved on the black anodized aluminum plate.
6. Test Conclusion
The test confirmed that the MP-60 fiber laser marking machine could produce a good engraved image result on a black anodized aluminum plate. The test achieved the required commemorative image effect recorded in the work order.
Before batch production, the final parameter values should be confirmed with the same material, artwork file, lens setup, and marking software.
