Introduction
This test used MP-60 with LightBurn software to mark an aluminum card. The goal was to check whether the machine could create a clean, high-contrast graphic on the card surface. The total marking time for this test was approximately 26 s.
1. Test Goal
The test was carried out to verify the marking performance of the MP-60 on an aluminum card. The required result was a clear black marking effect with readable detail and good visual contrast.
2. Test Requirement
The sample was an aluminum card. The marking process needed to produce a clean graphic on the card surface.
3. Machine and Material Setup
| Item | Details |
|---|---|
| Machine type | Fiber laser |
| Machine model | MP-60 |
| Software | LightBurn |
| Material | Aluminum |
| Test object | Aluminum card |
| Application | Decorative marking / custom card marking |
| Process | Laser marking |
| Processing time | 26 s |
| Test result | Good |
4. Laser Parameter Used
| Parameter Item | Value |
|---|---|
| Mode | Fill |
| Speed | 2500 mm/s |
| Max power | 40% |
| Frequency | 80 kHz |
| Q-Pulse width | 200 ns |
| Global passes | 1 |
| Line interval / Hatch | 0.0800 mm |
| Lines per inch | 317.500 |
| Scan angle | 180 deg |
| Number of passes | 1 |
| Angle increment | 0.0 |
| Pass count | 1 |
5. Test Result
The MP-60 completed the aluminum card marking test in 26 s. The final image shows a clean black graphic with strong contrast on the aluminum card surface, including fine line details in the illustration. The recorded test effect was good.
6. Test Conclusion
This aluminum card marking test achieved the required visual effect using the MP-60 fiber laser. The result shows that the machine can create high-contrast black marking with clear detail on an aluminum card surface.
This type of result may be useful for custom cards, metal card personalization, decorative metal tags, promotional products, and small-batch branding samples. Before batch production, the final parameter values should be confirmed with the same material, artwork file, lens setup, and marking software.
