My experience with CloudRay was great! The communication was seamless and the folks there went a step above to reach out to make sure what I was ordering would fit my machine. The tube arrived in a quick manor and has been working super ever since.
Extremely sturdy packaging. I probably could have thrown it off my roof and it would have been ok. Once installed it is everything I expected. The power supply gives off A LOT more EMI than I expected though, and I could have do e without the $325 freight charge, seeing how it arrived 4 days late. All in all I'd do ot again.
Works also fine. Plywood 4mm cuts at 12 speed.
I take the second time, I broke the first one. No complaints to work
Fast delivery, excellent quality, corresponds to the description
The pipe is excellent, the plywood 4mm confidently cuts at speed 6 and power 40. Came to the Kirov region in 10 days, packed very reliably
J. Horne f.
Perfect Set!!!! I just finished upgrading my 40w CO2 Laser with a new power supply and laser tube; I am beyond pleased with the performance improvement. If you are worried about the shipping of such an expensive tube don't be. This seller knows what they are doing then it comes to packing. The shipping box arrived in a awful condition. When I opened the box however, the tube was packed in such a away that UPS would have to run it over with a truck to cause damage.
Stephanie Green .
The 1250mm tube was packaged very well. It came with new quick connectors for the power wire and ground wire, so wiring it into my laser was really easy. Then it’s just the alignment process. I’ve used it a few times since install and so far, so good.
Very high quality product. A perfect replacement for the cheap laser in a Chinese K40 and it's a great upgrade. Cuts and engraves much better at a much lower power the the original.
The laser is big at exactly 80MM. I upgraded my 60 watt red and black laser and of course had to build an extension box for the laser to fit. The one thing I did NOT account for were the mounting bracket so the mounting brackets I purchased sat to high and was about 1.25 inches taller than mirror 1. I had to 3D print my own brackets so the laser can hit mirror 1.
The tube is very high quality, I did find the minimum firing was 15MA for my laser vs the 5MA the instructions say. Make sure you get an AMP meter for the laser as the max MA this tube can take is 25MA. My old 60 watt tube I could drive that thing to 80% power and just hit 25MA. This tube I will hit 25MA at 45% power.
I got this bundle sale. 100 watt power supply with the digital read out and external LCD screen I also have an analog MA reader but the digital is spot on, this way you can fine tune your laser and not worry about overdriving the tube.
Overall I am very happy with this set and highly recommend it. It beats the price of the recci tubes for sure.
For about $20 more than the basic tube, I decided to go with this one over the ten-high tube which is very similar to what the machine came with. I chose the CloudRay tube because firstly, it has a metal head. After about 3 years of light use on my old tube, the head had cracked right at the end and the laser lost most of its power. Secondly, I purchased some mirror mounts from them a while back and found them to be excellent quality.
So far, I think I made the right choice. I've added full drag-chain air assist, better gold mirrors and holders, adjustable depth cutting head with a much bigger and higher quality focus lens, full honeycomb bed, corner bracket that aligns the workpiece to home, etc etc etc.
If like me you're curious about the red connector that comes with the tube, the whole connector actually just slides off. It is just a large two piece connector meant to cover the splice in the high voltage wire. I used a red marine heat shrink butt connector to splice the high voltage wire which perfectly slid down into the connector CloudRay provided and is very very safe and secure that way.
Pick this one. Definitely seems like a nice upgrade for ~$20 more. If it fails early or starts misbehaving I'll be back to update my review, but for now I'm quite pleased with my purchase.
Пришло все быстро, целое, упаковано хорошо, доставили на дом. Трубку проверил, стреляет в тестовом режиме, на расстоянии 40 см пятно ровное, диаметр 4.4 мм, но полноценно еще не скоро проверю
Good goods according to the description, this already purchase the third time... Secure packing, recommended seller... Thank you ..
Order received in very good condition. This is my 2nd time to order this very same laser tube. The first one lasted 2 years and 5 months before I decided to replace with a new one. Delivery took 6 days.
Everything came very well, sent fast, as always a highly recommended seller
muy buen laser se demoro 3 semanas en llegar pero lo instale y todo bien otra cosa ahora corta sin problema muy bueno lo que si me costo mucho sacar las burbujas de agua pero 100% recomendado ahora ver cuanto dura
Everything as described. Fast shipping, solid packing. Very friendly seller. Recommended
I order the second time. the new pipe has not yet put, because the old one still works. with the correct adjustment of the machine, the plywood four cuts without problems.
Very good and safe packaging. Arrived un one piece, to be tested now ;-)
Looks good. No time to check. I hope it doesn't fail.
Product as described and with fast shipping
The pipe came quickly, packed very well. Until I put it, as I put it, I will definitely unsubscribe. Seller recommend.
The tube seems good. The spot is round and powerfull. I Hope this last long.
Laser tube arrived very well packaged and was easy to fit. New tube has noticeably more power output than the old one. Manufacture date on label shows it was made recently. All good.
Great replacement and it works perfect.
Пришла быстро, упаковано очень хорошо. С виду целая. После проверки дополню отзыв. Продавца рекомендую по сколько это не первый заказ в данном магазине.
Perfect packaging for a laser tube (double carton + foam), fast shipping and the seller is here if you have any troubles. I highly recommand this brand, for their customer services and high quality.
L'emballage du produit est parfait, le tube laser est entouré de poches d'air et de mousse pour ne pas qu'il casse, il y a deux couches protectrices, j'ai commandé 2 tubes les deux sont arrivés intacts.
La qualité du tube est très bonne, je recommande vivement la marque Cloudray pour leur service client ainsi que pour la qualité de leur produit !
Everything came safe and sound. Delivered the courier to the house/Workshop. Went about 7 days
Everything is fine tube working. Packed well. Delivery even faster than expected
Excellent tube and fast delivery. Thank you!
Nice pipe! Before that, there were 3 more pipes on my engraver, but none of them cut so quickly. Of course, it is unknown how much she will live, but the beginning is very good!
The goods walked quickly, well packed
The product corresponds to the description. The tube is packed well, it came whole. The parcel arrived in 5 days. After installation, I will add a review.
Everything Super came tube quickly. The seller sent also quickly. As in the machine votknu I will complement the review
seems to work, will know more once build is finished
wow! after changing from noname to cloudray laser tube my k40co2 is cutting 30% faster with 15% less power - great!
Apparently it's okay, it's missing to install to prove it.
Great. Fast delivery!
Best 40W tube I ever had! cutting speeds up even by 30-35% comparing to brand new "noname" tube. Little bit expensive, but definitely worth the money paid!
I have not checked yet, but everything looks fine. The pipe is packed so it probably would not be damaged if it was thrown from the 5th floor. It can be seen that the seller with great experience because it takes into account the features of national customs. Certainly the highest ball. Recommend.
I came quickly. There are no external defects. To check yet there is no possibility, unfortunately, the machine is at the stage of assembly. But, I think, everything is OK
The pipe came quickly and whole. I did not check yet, I took Prostock
пришло все. хорошо упаковано. выглядит все хорошо. На работоспособность еще не проверял.
It was well packed wrapped in a pupyrka went well! After checking, I will add a review
I was very worried with my order. Now I have received my order. I sincerely thank you
Unfortunately paying a shipping price so that in addition to doubling time, customs tariff. Late, expensive and low seller resolution.
Well packed tuba dzoszła in 10 days and is efficient. Recommend
Delivered and tested ok. Its working. He was inside two boxes. He suvived transport until Romania.
Everything is as excellent as ever! You're the best!
It took a litle longer time, but it arrived safely to CZ. It was held by customs so I had to pay additional fee( even with fee and shipping cost is still cheaper than from local stores) and laser tube came without damage and thats what matters. I will test it with power supply next weekend.
Fast transport and comes very well packed.
I didn't try it because I ordered this tube as a replacement.
Delivered very quickly, packed well, reliable. Chips and cracks are not visible.