Cloudray Leadshine 86HS45 2-Phase Nema34 Stepper Motor
SKU: SM10L2P86CM45
Made of high quality cold roll sheet copper and anti-high temperature permanent magnet, Leadshine's stepper motors are highly reliable and generate low motor heating. Because of their nice internal damping characteristics, those stepping motors can run very smoothly and have no obvious resonance area within the whole speed ranges.The 86HS45 two-phase stepper motor is suitable for a wide range of motion control applications. Terminated with 8 motor leads, the motor can be connected in a few different ways, including bipolar series, bipolar parallel and unipolar.
1. 2 phase 1.8 degree stepping angle.
2. NEMA 34.
3. Holding toque of 4.5 N*m (637 oz-in).
4. High precision.
5. Smooth movement.
6. Low motor heating.
7. Low movement noise.
General Specifications
|
Step Angle Degreen
|
1.8 degree
|
|
Step Angle Accuracy
|
plus or minus 5%(full step,no load)
|
|
Temperature Rise
|
80 centigrade Max
|
|
Ambient Temperature
|
-10 centigrade --+50 centigrade
|
|
Insulation Resistance
|
100M ohms min.500VDC
|
|
Dielectric Strength
|
500VAC for one minute
|
|
Shaft Radial Play
|
0.06 Max.(450g-load)
|
|
Shaft Axial Play
|
0.08 max.(450g-load)
|
Electrical Specifications
|
Model Number
|
Connection
|
Motor Length L inch (mm)
|
Holding Torque Oz-in (Nm)
|
Number of Leads
|
Phase Current (Amps)
|
Phase Resistance (Ohm)
|
Phase Inductance (mH)
|
Rotor Inertia Oz-in-sec^2 (g.cm^2)
|
Detent Torque Oz-in (g.cm)
|
Weight Oz (kg)
|
|
86HS45
|
(Bipolar) Parallel
|
3.13(80)
|
637.2(4.5)
|
8
|
6.0
|
0.375 plus or minus 10%
|
3.4 plus or minus 20%
|
0.01988 (1400) |
18.2 (1300) |
81.1(2.3)
|
|
(Bipolar) Series
|
637.2(4.5)
|
3.0
|
1.5 plus or minus 10%
|
14 plus or minus 20%
|
||||||
|
Unipolar
|
453.12(3.2)
|
4.2
|
0.75 plus or minus 10%
|
3.4 plus or minus 20%
|
Unipolar and bipolar half coil, because we are using less turns, does not give us great low speed torque, but because of the low inductance, holds the torque out to high speeds. Bipolar series uses the full coil so it gives very good low speed torque. But because of the high inductance, the torque drops off rapidly. Bipolar parallel also uses the full coil so it gives good low speed performance. And its low inductance allows the torque to be held out to high speeds. But remember, we must increase current by 40% to get those advantages. Speed-torque curves show the maximum torques that can be output at a given speed. When selecting a motor, make sure the required torque falls within the particular curve.
Notification: Customs clearance inspections (CN Warehouse) will cause delays 2-3 days in logistics.
1. Accessories sitewide: 3-7 Business Days
2. Machine with the default configuration: CN Warehouse: 5-7 Business Days
USA/EU Warehouse: 3-7 Business Days
3. Customized Machine (Only Support Shippment From China Warehouse)
The average period of production: 7-10 Business Days
Shipping: 7-10 Business Days
New Arrivals To Lauch
Auxiliary Tools
View all
Annual Clearance (Lowest Price Ever)-LIMITED OFFER
View all
Recently viewed
FAQs
CF Series:New Cloudray Integrated Control Card, Touchscreen,suitable for beginners in DIY
AR Series:2.5D Deep Engraving with Electrical Lifting Column, better in engraving
MP Series: Mopa (Anodized Aluminum Black Marking; Titanium & Stainless Steel Color Marking)
QS Series: Q-switched pulse laser (large single pulse energy for deep marking)
Please email us (info@cloudray.com) directly to offer us your working material, and the expected effect on those materials by machine with pictures or video.
Yes, they are different. Official website and stores on shopping platforms(Amazon/Ebay etc.) are different sales channels. Each sales channel operates independently.
All product information, policies, and extra offers published on the website are only adapted to orders on www.cloudraylaser.com, and not adapted to stores on shopping platforms.
1. Different Machine Types and Configurations.
The laser machines will be equipped with unique configurations (only for machines on www.cloudraylaser.com) which have high stability and marking efficiency.
Support Customization of your laser machine and upgrading solutions if needed.
2. Different Offer
Since for different configurations and policies, product prices will be different.
And We only offer lifetime tech support and marking/engraving parameters, free materials for orders directly on www.cloudraylaser.com, not adapted to any orders from other sales channels.
3. Customer Service Support
We can only offer after-sale service for customers ordered on www.cloudraylaser.com, not responsible for orders from shopping platforms as we don't have your order information in our system. Please contact the store on platforms to get related support in time.
4. Official Loyal Custoemrs Benefits
We will run the free trial campaign from time to time for loyal customers who directly ordered on www.cloudraylser.com, not adapted to customers from other sales channels.
Also, we offer free gifts for customers who ordered during grand festivals.
1.Machine with the default configuration：
CN Warehouse: 7-10 Business Days
Oversea Warehouse: 3-5 Business Days
2. Customized Machine (Only Support Shippment From China Warehouse)
The average period of production: 7-10 Business Days
Shipping: 7-10 Business Days
(Notification: Customs clearance inspections will cause delays 2-3 days in logistics）
1. Return & Exchange Policy:https://www.cloudraylaser.com/pages/return-exchange
2. Shipping Policy:https://www.cloudraylaser.com/pages/shipping
3. Payment & Taxes:https://www.cloudraylaser.com/pages/payment-taxes
The machine has 2 years guarantee. If it breaks down, generally speaking, our technician will figure out what the problem may be, according to clients’ feedback. Parts except for consumable parts will be replaced for free if the problems are caused by quality faults. Even if the machine is beyond the warranty, we can still offer technical assistance as your order is placed on www.cloudraylaser.com.
