Cloudray Leadshine 3DM683 3-Phase Stepper Driver
Cloudray Leadshine 3DM683 3-Phase Stepper Driver
Notification: Cloudray Official Customer Service is only for orders directly on cloudraylaser.com. Please check our FAQ before purchasing.
- Cloudray Official Quality Inspection（100% brand new original authentic）
- More Details of Configurations in Description (Click to Expand)
- Secure payments; Lifetime Tech Support (Specialists)
- Support Shipping Worldwide （For International Shipping, the customer needs to pay customs fees to your local customs, we will not charge this part of the fee）
|
Parameters |
3DM683 |
|||
|
Min |
Typical |
Max |
Unit |
|
|
Output Current |
0.5 |
- |
8.3 (5.9 RMS) |
A |
|
Supply Voltage |
+20 |
- |
+60 |
VDC |
|
Logic Signal Current |
7 |
10 |
16 |
mA |
|
Pulse Input Frequency |
0 |
- |
200 |
kHz |
|
Isolation Resistance |
500 |
MΩ |
||
|
Suitable Stepper Motors |
3-Phase NEMA 23, 34 |
|||
|
P1 Function |
3DM683 Details |
|
PUL+ |
Pulse signal: In single pulse (pulse/direction) mode, this input represents pulse signal, effective for each rising edge or falling edge (set by inside jumper J1); 4-5V when PUL-HIGH, 0-0.5V when PUL-LOW. In double pulse mode (pulse/pulse) this input represents clockwise (CW) pulse. For reliable response, pulse width should be longer than 1.5μs. Series connect resistors for current-limiting when +12V or +24V used. |
|
PUL- |
|
|
DIR+ |
DIR signal: In single-pulse mode, this signal has low/high voltage levels, representing two directions of motor rotation; in double-pulse mode (set by inside J1 jumper), this signal is counter-clock (CCW) pulse, effective for low level. For reliable motion response, DIR signal should be ahead of PUL signal by 5μs at least. 4-5V when DIR-HIGH, 0-0.5V when DIR-LOW. |
|
DIR- |
|
|
ENA+ |
Enable signal: This signal is used for enabling/disabling the driver. High level (NPN control signal, PNP and Differential control signals are on the contrary, namely Low level for enabling.) for enabling the driver and low level for disabling the driver. Usually left UNCONNECTED (ENABLED). |
|
ENA- |
|
P2 Function |
3DM683 Details |
|
GND |
Power Ground |
|
+Vdc |
Power supply, 20~60 VDC, Including voltage fluctuation and EMF voltage. |
|
U |
Motor phase U |
|
V |
Motor phase V |
|
W |
Motor phase W |
Notification: Customs clearance inspections (CN Warehouse) will cause delays 2-3 days in logistics.
1. Accessories sitewide: 3-7 Business Days
2. Machine with the default configuration: CN Warehouse: 5-7 Business Days
USA/EU Warehouse: 3-7 Business Days
3. Customized Machine (Only Support Shippment From China Warehouse)
The average period of production: 7-10 Business Days
Shipping: 7-10 Business Days
