Choose your perfect laser engraver: Cloudray QS-50
Laser engraving has become an invaluable tool for various industries, allowing for precise and intricate markings or engravings on a wide range of materials. Choosing the correct laser engraver can often feel like an intricate task.
For metal processing, fiber laser engravers are undoubtedly the most suitable. These lasers also perform extremely well for marking plastics.
Cloudray currently promotes two series：
1.QS Series: 30w 50w Raycus Q-switched laser
2.MP Sereis: 60w Mopa laser
Which materials can these lasers engrave?
| 30w 50w Raycus Q-switched laser | 60w Mopa laser |
|
|
If you are looking for a better finish on plastic materials and for having the possibility of engraving different colors on stainless steel, titanium, or black color on aluminum you can think about MP series that MOPA laser can offer.
On the other hand, if you are only looking to engrave metals at high speed and deepness, and you don't need to engrave colors on metals, then you can choose QS series laser.
The two series lasers are roughly the same in terms of work effect and technology, but they are different in price, Raycus lasers tend to be more cost-effective than mopa lasers.
For QS series Raycus Q-switched laser engraver, we divide them into 30W and 50W.
QS-30 (30w Raycus laser): Cost-effective style, suitable for all kinds of medium or small metal parts marking. (Not suitable for deep engravings, recommendation for less than 0.5mm depth)
QS-50 (50w Raycus laser): Suitable for large area markings(300*300mm), can realize permanent deep engravings (up to 1mm depth).
QS-50 laser can be regarded as a balanced choice in laser engraving machines. Compared with QS-30 laser, the 50W laser can provide higher engraving speed and deeper engraving depth. Compared to MP-60 laser, the 50W laser is more economical in terms of cost while still delivering quite high results.
Leave a comment