Cloudray Leadshine M542C 2 Phase Stepper Driver

SKU: SMD10L2PM542C
Cloudray Leadshine M542C 2 Phase Stepper Driver
Cloudray Leadshine M542C 2 Phase Stepper Driver
Cloudray Leadshine M542C 2 Phase Stepper Driver
Cloudray Leadshine M542C 2 Phase Stepper Driver
Cloudray Leadshine M542C 2 Phase Stepper Driver
Cloudray Leadshine M542C 2 Phase Stepper Driver
Cloudray Leadshine M542C 2 Phase Stepper Driver
Cloudray Leadshine M542C 2 Phase Stepper Driver
Cloudray Leadshine M542C 2 Phase Stepper Driver
Cloudray Leadshine M542C 2 Phase Stepper Driver

Cloudray Leadshine M542C 2 Phase Stepper Driver

SKU: SMD10L2PM542C
/
  • Cloudray Official Quality Inspection（100% brand new original authentic）
  • More Details of Configurations in Description (Click to Expand)
  • Secure payments; Lifetime Tech Support (Specialists)
  • Support Shipping Worldwide
Shipping calculated at checkout.

 


 

 

Parameters

M542C

Min

Typical

Max

Unit

Output Current

1.0

-

4.2 (3.0 RMS)

A

Supply Voltage

20VAC

36VAC

50VAC

V

Logic Signal Current

7

10

16

mA

Pulse Input Frequency

0

-

300

kHz

Step Revolution

400

 

25600

Pulse/Rev

Isolation Resistance

500

MΩ

Suitable Stepper Motors

NEMA 16,17,23

 


 

 

P1 Function

M542C Details

PUL+

Pulse signal: In single pulse (pulse/direction) mode, this input represents pulse signal, each rising or falling edge active (set by inside jumper J1); 4-5V when PUL-HIGH, 0-0.5V when PUL-LOW. In double pulse mode (pulse/pulse) , this input represents clockwise (CW) pulse,active at high level or low level (set by inside jumper J1, J2). For reliable response, pulse width should be longer than 1.5µs. Series connect resistors for current-limiting when +12V or +24V used. The same as DIR and ENA signals.

PUL-

DIR+

DIR signal: In single-pulse mode, this signal has low/high voltage levels, representing two directions of motor rotation; in double-pulse mode (set by inside jumper J3), this signal is counter-clock (CCW) pulse,active at high level or low level (set by inside jumper J1, J2). For reliable motion response, DIR signal should be ahead of PUL signal by 5µs at least. 4-5V when DIR-HIGH, 0-0.5V when DIR-LOW. Please note that rotation direction is also related to motor-drive wiring match. Exchanging the connection of two wires for a coil to the drive will reverse motion direction.

DIR-

ENA+

Enable signal: This signal is used for enabling/disabling the drive. High level (NPN control signal, PNP and Differential control signals are on the contrary, namely Low level for enabling.) for enabling the drive and low level for disabling the drive. Usually left UNCONNECTED (ENABLED).

ENA-


 

 

P2 Function

M542C Details

+Vdc

Power supply, 20~50 VDC, Including voltage fluctuation and EMF voltage.

GND

Power Ground.

A+, A-

Motor Phase A

B+, B-

Motor Phase B

Notification: Customs clearance inspections (CN Warehouse) will cause delays 2-3 days in logistics.

1. Accessories sitewide: 3-7 Business Days

2. Machine with the default configuration: CN Warehouse: 5-7 Business Days
USA/EU Warehouse: 3-7 Business Days

3. Customized Machine (Only Support Shippment From China Warehouse)
The average period of production: 7-10 Business Days
Shipping: 7-10 Business Days

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

New Arrivals To Lauch

Auxiliary Tools

View all
Cloudray D69 D80 D100 A Series Rotary Attachment Set
Cloudray D69 D80 D100 D125 B Series 3 Jaw Chuck Rotary Attachment Set
Cloudray 100W EF01 Min Smoke Purifier Fume Extraction System
Cloudray 135W EF-200M Min Smoke Purifier Fume Extraction System
Cloudray K9 M85 Fiber Laser F-theta Scan Lens

Annual Clearance (Lowest Price Ever)-LIMITED OFFER

View all
Sale
QS-50 LiteMarker 50W Split Laser Engraver Fiber Marking Machine With 11.8” X 11.8” Working Area (FLASH SALE)
Sale
QS-G-50 UltraMarker-G 50W Laser Engraver Fiber Marking Machine
50W Raycus Laser Engraving Marking Machine
QS-W-50 ProMarker-W 50W Cabinet Type Closed Laser Engraver Fiber Laser Marking Machine
Sale
EU Warehouse MP-30 LiteMarker 30W Split Laser Engraver Fiber Marking Machine With 7.9” X 7.9” Working Area
Sale
EU Warehouse QS-P-50 LiteMarker 50W Split Laser Engraver Fiber Marking Machine With 11.8” X 11.8” Working Area
Recently viewed
Back to Motor & Driver

FAQs

CF Series:New Cloudray Integrated Control Card, Touchscreen,suitable for beginners in DIY

AR Series:2.5D Deep Engraving with Electrical Lifting Column, better in engraving

MP Series: Mopa (Anodized Aluminum Black Marking; Titanium & Stainless Steel Color Marking)

QS Series: Q-switched pulse laser (large single pulse energy for deep marking)

Please email us (info@cloudray.com) directly to offer us your working material, and the expected effect on those materials by machine with pictures or video.

Yes, they are different. Official website and stores on shopping platforms(Amazon/Ebay etc.) are different sales channels. Each sales channel operates independently.
All product information, policies, and extra offers published on the website are only adapted to orders on www.cloudraylaser.com, and not adapted to stores on shopping platforms.

1. Different Machine Types and Configurations.
The laser machines will be equipped with unique configurations (only for machines on www.cloudraylaser.com) which have high stability and marking efficiency. 
Support Customization of your laser machine and upgrading solutions if needed.

2. Different Offer
 Since for different configurations and policies, product prices will be different.
And We only offer lifetime tech support and marking/engraving parameters, free materials for orders directly on www.cloudraylaser.com, not adapted to any orders from other sales channels.

3. Customer Service Support
 We can only offer after-sale service for customers ordered on www.cloudraylaser.com, not responsible for orders from shopping platforms as we don't have your order information in our system. Please contact the store on platforms to get related support in time.

4. Official Loyal Custoemrs Benefits
We will run the free trial campaign from time to time for loyal customers who directly ordered on www.cloudraylser.com, not adapted to customers from other sales channels.
Also, we offer free gifts for customers who ordered during grand festivals.

1.Machine with the default configuration：
CN Warehouse: 7-10 Business Days
Oversea Warehouse: 3-5 Business Days


2. Customized Machine (Only Support Shippment From China Warehouse)
The average period of production: 7-10 Business Days
Shipping: 7-10 Business Days
(Notification: Customs clearance inspections will cause delays 2-3 days in logistics）

1. Return & Exchange Policy:https://www.cloudraylaser.com/pages/return-exchange

2. Shipping Policy:https://www.cloudraylaser.com/pages/shipping

3. Payment & Taxes:https://www.cloudraylaser.com/pages/payment-taxes

The machine has 2 years guarantee. If it breaks down, generally speaking, our technician will figure out what the problem may be, according to clients’ feedback. Parts except for consumable parts will be replaced for free if the problems are caused by quality faults. Even if the machine is beyond the warranty, we can still offer technical assistance as your order is placed on www.cloudraylaser.com.

Official Website Special Offer

Lifetime Tech Support

1. Only offers free lifetime tech support via remote connecting (email or phone) to customers on www.cloudraylaser.com.

2. And even after the warranty period, we still offer tech support and will provide a quote for the necessary parts and repairs at a high-discounted price.

Tech Specialists Support

1. Only Customers who once ordered on www.cloudraylaser.com have the chance to get free Tech Specialists Support.

2.For urgent demands on complex tech support, we will arrange for Specialists to assist you via remote operation or phone call directly.

Free Trial of New Products

Customers ordered directly on www.cloudraylaser.com will have the chance to join in Cloudray Monthly Free Trial Campaign ( Take new products for free trial )